When you’re in the process of buying church chairs or sanctuary furniture, you may run into some unfamiliar language. To help you make a more informed buying decision, we’ve put together a glossary of common industry terms.
Church chairs are commonly called “pew chairs,” especially if they interlock to form continuous rows. They may also be called worship chairs or sanctuary seating. But many people just refer to them as church chairs.
Vendors often use terms that may be unfamiliar to you or your buying committee. Here are some brief definitions organized by chair part.
When looking at chair frame specifications, you may see that some frames are made of cold-rolled steel. This refers to the process of shaping the metal. In cold rolling, steel is cooled to room temperature and then receives further processing (as opposed to hot rolled steel that is processed without cooling). This gives manufacturers more control over the size and shape of the finished product.
The wall thickness of the steel tube used in a chair frame; a lower number means thicker, stronger steel. Common worship seating uses 16 or 18-gauge (Our chairs use 16-gauge steel).
This refers to a 5-step painting process where an electrostatic charge is applied to the powder particles. The powder coating is therefore bonded to the metal of the chair frame for a scratch and chip resistant finish. This is the same process that is used to paint motor vehicles.
The fastening system refers to the way chair components are held together. For example, the way the seat is held to the back of the chair. There are different types of fastening systems such as wood screws, steel-to-plastic, and steel-to-steel (T-Nut) systems. Overall, steel-to-steel gives you the strongest holding power – up to five times the amount of other systems – but it’s common to see wood screws and steel-to-plastic systems in church chairs.
Did you know? ChurchPlaza pioneered the use of T-Nuts in church seating. Learn more about our chair features.
Mandrel bends are another term you’ll come across with chair frames. If a chair has mandrel bends, that means a steel rod was inserted into the frame of the chair as it was being bent into shape. This is done to create smooth angles with no wrinkles in the frame.
Overall, the frame and foundation are perhaps the most important components of the chair. These are the “foundations” upon which the bottom and back supports are constructed. Many manufacturers will use “Strand Board” or another composite material for their chair foundations, but commercial plywood is the most durable material.
The structural platform beneath the cushion (often plywood or engineered polymer). A robust seat deck supports foam, keeps comfort consistent, and prevents “sagging” over time. Our chairs use industrial quality 1/2” true plywood or or Space age Polymer ToughTM.
A contoured back is a chair feature that provides extra comfort and support. See an example of a church chair with a contoured back below:
You may come across the terms virgin foam and recycled foam when evaluating church chairs. Virgin foam means that the foam used in the seat is brand-new – it has never been used before. Recycled foam is made from old foam that has been used on other chairs. Virgin foam is far superior in both comfort and durability.
This is the mass of foam per cubic foot; higher density generally means better support retention and durability. Density works together with ILD/IFD and thickness to determine “feel.”
This is an abrasion-resistance score for upholstery fabric that’s based on back-and-forth passes on a test rig. Higher numbers indicate better wear performance in busy spaces.
This is a backing layer on upholstery that helps prevent spills and cleaning solutions from reaching the foam.
Some church chairs feature a waterfall edge. This means the seat is rounded at an angle that reduces pressure on the legs. Ultimately, this makes for a more comfortable seating experience.
These ChurchPlaza models have a waterfall edge seat:
Ganging refers to hooks on the sides of chairs that allow them to be connected together in a row. If you’re looking for church chairs that hook together, ask for chairs with ganging.
These are small rubber chair stack buttons that are placed on the legs of each chair to protect against scratches when the chairs are stacked.
Chair floor glides are put on the bottom of the chair legs to protect the floor from damage when chairs are slid or rearranged.
When evaluating chair components, it’s important to keep in mind safety. Some chairs emit dangerous, cancer-causing chemicals. Luckily, many governments and organizations have recognized this risk and developed safety certifications. Here are some common church chair safety certifications to look out for:
Contact our sales representatives if you have any questions about these or other church chair components. We are happy to discuss the chair specifications in detail. You can also call us directly at 1-800-927-6775.
December is a special and joyful season for churches, but the winter weather can be…
Planning church events — whether it’s a fellowship dinner, a youth group gathering, or a…
Sustainable chairs and church furniture offer a way to create a comfortable, functional worship space…
A game night is a great opportunity to build relationships and create memories across all…
Renovating your church is more than just a facelift — it’s an investment in your…
In many local communities today, the need for food assistance is growing. Rising costs of…